SciCan HydriM L110w Manuel De L'utilisateur page 17

5. instructions for Use
Unit No.
Default 0
Language Selection
English
Default English
Set Regeneration
Default 0
Setup Menu – Unit Number
If you have more than one Hydrim, you can designate
them Unit #1, Unit #2, etc. Use the up and down arrow
0
keys to select the unit number. The default is 0.
Setup Menu – Language Selection
This allows the user to select among available languages
for the Hydrim. Use the up and down arrows to select
the desired language. The default language is English.
Touch the back arrow to return to the previous menu.
Setup Menu – Set regeneration
Set the salt regeneration according to the local water hardness.
Use the up and down arrows to change the value. The default
0
setting is 0 . See Installation Instructions for further information.
15