SciCan HydriM L110w Manuel De L'utilisateur page 18

5. instructions for Use
Set Button Beep
Default On
Screen Saver
4min
Default 4min
Temperature C/F
Default C
LCD Contrast
50%
Default 50%
Setup Menu – Set Button Beep
The user can select between having the unit beep or not beep
whenever a screen button is touched. T urn the beep on or off by
On
using the up and down arrows. Note that the default setting is
ON. Touch the back arrow to return to the previous menu.
Setup Menu – Screen Saver
The user can adjust the time that elapses before the screen
goes into screen saver mode. Touch Screen Saver. Touch the
up and down arrows to select the desired screen saver setting.
The default is 4 minutes. Touch the back arrow to return to
the previous menu.
Setup Menu – Temperature C/F
The user can choose to have information displayed in degrees
C
Celsius or degrees Fahrenheit. Touch the up and down
arrows to select the desired choice. The default is degrees
Celsius.Touch the back arrow to return to the previous menu.
Setup Menu - LCd Contrast
The user can adjust the LCD contrast. Touch the up and down
arrows to select the desired contrast. The default is 50%. Touch
the back arrow to return to the previous menu.
16