Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting / Information about warranty and service processing
Troubleshooting
Note: Regular lubrication is imperative to ensure
the longest possible life for your compressed air
After every maintenance verify the equipment
is still operating as originally.
Faults
Impact driver not
working
Not properly tight-
ening screw
Not loosening
screw
Information about warranty
and service processing
Creative Marketing Consulting GmbH
warranty
Dear customer, the warranty for this device is 3
years from the date of purchase. In the event of
product defects you have legal rights against the
retailer of this product. Your legal rights are not li-
mited in any way by our warranty detailed below.
56 GB
Possible causes
Trigger
not pulled
4
No compressed air supply
Leak in compressed air
system
Compressor defective
Defect inside the air tool
Air pressure too low
Torque is too low
Rusted screw
device. We recommend continuous lubrication via
the included lubricator
Action
Pull trigger
4
If applicable, drain condensation from tube (water
bag)
Straighten kinks in the hose
Connect compressed
2
Remedy leak
Verify the compressor is supplying compressed air. If
necessary, have compressor repaired by a qualified
professional
Have air tool repaired by a qualified professional
Increase air pressure.
ATTENTION! Never exceed the maximum ap-
proved operating pressure of the air tool!
Turn torque control
to a higher setting
3
Apply rust remover to screw
Warranty terms
The warranty period begins on the date of purchase.
Please keep the original sales receipt in a safe lo-
cation. This document is required as your proof of
purchase.
Should this device show any fault in materials or
manufacture within three years from the date of
purchase, we will repair or replace it - at our choice -
free of charge to you. Warranty services require
the defective device and the proof of purchase (sales
.
11
air
Publicité
Chapitres
Table des Matières
Dépannage
