Brake Pedal; Abs - Benelli 302S Manuel Du Propriétaire

Instrument and control functions
the adjustment gauge is in line with the
brake lever reference "▲".
EN
3

Brake pedal

The brake pedal is located on the right
side of the motorcycle. To apply the rear
brake, press down on the brake pedal.
3 - 10

ABS

The anti-lock system (ABS) is designed to
prevent locking of wheels during braking.
The ABS controls the braking power auto-
matically and intermittently, allowing the
wheels to gain grip on the road and incre-
asing the vehicle stability.
• For more efficiency, use the front
brake and the rear one at the same
time and in the same manner, as on
a vehicle without ABS.
• The ABS cannot compensate the
road harsh conditions or an impro-
per use of the braking system. Du-
ring braking, act with the same care
as in case of a vehicle without ABS.
• The anti-lock system (ABS) helps to
prevent locking of wheels during
braking with motorcycle in straight
line.
• During cornering, it is advisable to
use both brakes in a soft manner and
to reduce the speed gradually. As on
a traditional braking system, a hard
and excessive braking may cause a
sudden lock of the wheels and the
motorcycle loss of control.
• During braking, the ABS will not
prevent the rear wheel from raising
form the ground.
• The ABS control unit always uses the
vehicle speed data and wheel rota-
tion speed. Do not use non-appro-