VINCENT CD-S7 DAC Manuel D'utilisation page 41

Operation
Skip to the
following track
Skip to playback
the previous track
Fast forward
Fast rewind
Insert/Change the CD
Select input source
OPERATING THE APPLIANCE
PLAYBACK FUNCTIONS
Button(s) Description
When this button is pressed while the CD is playing, the current track stops
playing and the next track in the sequence begins to play. If this button is
(10)(35) pressed in "STOP" mode, you can choose all the CD tracks one after the
NEXT other starting from track 02. Playback can then be started again with the
"PLAY/PAUSE" button (7)(26). With the "CANCEL" button (31) the player
goes back to "STOP" mode. The button is located both on the front of the
device and on the remote control.
If this button is pressed once while the CD is playing, the current track stops
and the actual track starts playing from the start again. Further presses skip to
playing the previous tracks in reverse playing sequence. If this button is pres-
(9)(34) sed in the "STOP" mode, you can choose all the CD tracks in reverse order
starting with the last track. Playback can then be started again with the
BACK
"PLAY/PAUSE" button (7)(26). With the "CANCEL" button (31) the player
goes back to "STOP" mode. The button is located both on the front of the
device and on the remote control.
The track will be played at higher speed (fast forward) as long as you con-
tinue to hold down this button while the CD is playing. If the button is
(27)
(FAST released, playback will continue at normal speed. If the CD play is stop-
FORWARD) ped, then this button has no function. This play function too can only be
used via the remote control.
The track will be played backwards at higher speed ("rewind") as long as
you continue to hold down this button while the CD is playing. If the button
(29)
is released, play will continue at normal speed in a forward direction. If
(FAST BACK)
the CD playback is stopped, then this button has no function. This play
function too can only be used via the remote control.
With this button you open and close the disc tray so that a CD can be inser-
ted or removed. This button is located both on the front of the device and on
(8)(30)
OPEN/ the remote control. If the text "OVER" appears in the display (3), then the CD
CLOSE contains more than 16 tracks. Some of the tracks cannot then be shown in the
display's music menu.
With this button, you can select between four input sources (CD, USB,
(11) Coaxial IN and Optical IN). By pressing this button, the player changes to
SELECT the playback of the device connected thereto. The input channel's name is
shown on the display (3).
Vincent
41