VINCENT CD-S7 DAC Manuel D'utilisation page 30

14
14. AUDIO OUTPUTS:
analogue audio signal outputs
Either the RCA or the XLR sockets are connected
to the relevant input of the amplifier, preamplifier
etc. It is not necessary to also connect the digital
signal output (15).
15. DIGITAL OUT COAXIAL:
digital audio signal output
If the amplifier, receiver or preamplifier is equip-
ped with a digital coaxial input connector, the
relevant CD player signal output may be connec-
ted to this. It is not necessary to connect an ana-
logue (14) and a digital signal output (15) at the
same time.
16. LAMP: Dimmer for the tube illumination
The setting of this switch affects the brightness of
the illumination of the tube display window (2).
Vincent
30
REAR VIEW
19
15
17. POWER CONTROL (12V): ON/OFF control
These jack connectors (3.5 mm) receive and for-
ward the signal for the standby control (12V
Trigger).
18. AC: Power Connector
To establish the power supply, connect the plugs
of the power cable to the device and to a suitab-
le wall outlet.
19. DIGITAL IN:
USB: Input connector
Connect your PC, laptop etc. here using the
provided USB cable
Optical/Coaxial
Connections for audio signals of source devi-
ces with digital sound such as, for example,
DVD players. "Optical" for optical fibre con-
nection and "Coaxial" for connection via
coaxial cable.
16
17
18