EUROM Comfy 1800 RC Manuel D'utilisation page 25

- or there are no objects, canvas, sun screens etc. are inside the safety distances.
- or the socket you want to use gives the correct tension (220-240V~50Hz) and is
grounded.
If everything is all right you can insert the plug into the socket.
Comfy 1300
The infrared heater will now start its operation. When you use the appliance for the
first time (or after a long time again), observe it during the first 10 till 15 minutes
to be sure that is works trouble-free.
Comfy 1800 RC & Comfy 2200 RCD
The Comfy 1800 RC & 2200 RCD has a remote control that works with two
batteries: AAA, 1.5V.
While using, point the remote control to the receiving point of the heater (on the
electric part). If there are obstacles between remote control and the heater, it will
not work!
Remove the batteries out of the season, that will extend the life of the remote
control.
 Press the on/off switch (1) on the side of the unit to "I" (on). The light of the
reception point (2) will light.
 Set the device into operation by pressing the ON button of the remote control.
Comfy 1800 RC
 The infrared heater will now start its operation.
Comfy 2200 RCD
 The device has a 'slow start' at 33% output (NB. This requires a fuse type C). 4
seconds after starting, it automatically switches to the most recently used
output. On first use, it will switch to 100% output after 4 seconds.
 Select the appropriate power level by pushing
When you use the appliance for the first time (or after a long time again), observe
it during the first 10 till 15 minutes to be sure that is works trouble-free.
^
or V button (33 - 66 - 100%).
25