Publicité

AN TI PAST O
10 77 6
single-control pull-out kitchen faucet
robinet de cuisine monocommande
avec douchette rétractable
Installation & Care Guide
Guide d'installation et d'entretien
last revision: 10/12/2020

Publicité

Table des Matières
loading

Sommaire des Matières pour Alt ANTIPASTO 10776

  • Page 1 AN TI PAST O 10 77 6 single-control pull-out kitchen faucet robinet de cuisine monocommande avec douchette rétractable Installation & Care Guide Guide d’installation et d’entretien last revision: 10/12/2020...
  • Page 2: Félicitations Pour L'achat De Votre Produit Alt

    Félicitations pour l’achat de purchase of your Alt product votre produit Alt By purchasing an Alt product, you are taking part in En achetant un produit Alt, vous prenez part au the global movement for better living. We take pride in mouvement global pour le mieux-vivre.
  • Page 3 FAUCET COMPONENTS COMPOSANTES DU ROBINET SPECS AT LARGE SHÉMA DES PIÈCES ALT7-10-731-01: handle / poignée ALT7-55-736-00: cartridge / cartouche ALT7-10-751-00: tie-down kit / pièces d’assemblage ALT7-10-759-00: handshower hose / flexible pour douchette ALT7-10-710-00: hot water supply hose / flexible d'eau chaude ALT7-10-709-00: cold water supply hose / flexible d'eau froide ALT7-10-746-01: side spray / douchette ALT7-10-764-01: aerator / aérateur...
  • Page 4: Before You Start Avant De Commencer

    BEFORE YOU START AVANT DE COMMENCER CAUTION: FOR BEST RESULTS, WE STRONGLY MISE EN GARDE: POUR OBTENIR UN RÉSULTAT RECOMMEND THE INSTALLATION OF THIS FAUCET BE OPTIMAL, NOUS RECOMMANDONS FORTEMENT QUE DONE BY A LICENSED PROFESSIONAL PLUMBER. L’INSTALLATION DE CE ROBINET SOIT FAITE PAR UN PLOMBIER PROFESSIONNEL ACCRÉDITÉ.
  • Page 5 INSTALLATION Installing the Faucet We recommend drilling a 1- 3/8" diameter hole for the insertion of the faucet You can install the faucet with or without the cover plate - With the cover plate: ø 1 3/8” HOLE DRILLING Remove the flange (4) from the faucet, insert the plate and secure with the PERÇAGE first nut (3).
  • Page 6 INSTALLATION Flushing the Lines After installing the faucet, connect the hot (RED) and cold (BLUE) (13) (14) 3/8” flexible hose inlets to the water supply lines. Before connecting the spout, turn on hot and cold water in order to flush residue and impuri- ties.
  • Page 7: Maintenance, Entretien

    MAINTENANCE ENTRETIEN Cleaning the Aerator To clean the aerator (21), unscrew the aerator case (22) from the spout. Then pull out the aerator and soak it in a vinegar and water solution to remove lime build-up. Once parts have been cleaned, reas- semble by reversing steps.
  • Page 8 CARE SOIN To clean your ALT faucet or accessory, wash with a Pour nettoyer et conserver l’apparence de vos robinets ou accesoires ALT, lavez-les avec un linge wet nonabrasive soapy cloth. Then wipe dry with a mouillé à l’eau tiède et enduit d’un savon doux soft towel or cloth.
  • Page 9: Warranty Garantie

    - Any and all ALT products that are subjected to any type of harsh de produits abrasifs, de corrosion et/ou d’accidents causés par un abrasive, such as cleaners containing abrasive cleansers, ammonia, professionnel ou par toute autre personne.

Table des Matières