Sony SCD-XA3000ES Mode D'emploi page 6

Hooking Up the Audio Components
Connecting via ANALOG 2CH OUT jacks
Use an audio connecting cords for this connection. Connect the
ANALOG 2CH OUT L/R jacks to the CD (Super Audio CD)
input jacks of your amplifier. Be sure to match the colour-coded
pin to the appropriate jacks: white (left) to white and red (right)
to red.
Audio connecting cords (Red and White) (not supplied*)
White (L)
Red (R)
* If you do not make the ANALOG 5.1 CH connection, you can
use the supplied audio connecting cable for the ANALOG 2CH
connection.
ANALOG
2CH OUT 5. 1CH OUT
FRONT SURROUND CENTER
L
L
R
R
To CD (Super Audio
CD) IN jacks (L/R)
6 GB
White (L)
Red (R)
DIGITAL(CD)
OUT
COAXIAL OPTICAL
SUB
WOOFER
Stereo amplifier, etc.
Note
During playback of a Multi-channel Super Audio CD, the same
signal that is output from the ANALOG 5.1CH FRONT L/R jacks
is also output from the ANALOG 2CH OUT jacks. (The down
mixed signal of the Multi-channel signal is not played back.)