Bartscher PRO Plus 40T A190145 Mode D'emploi page 36

ATTENTION!
Make sure the glass tube is properly placed in the seal.
Slightly tighten the screws, otherwise the glass may break.
o Remount the fill level indicator cover, sliding it down from above and then snapping it
into place.
Cleaning the heating hole
o The heating hole must be thoroughly cleaned every week, especially if used daily.
o Included in the coffee maker packaging is a scale deposit scraper for cleaning the
heating hole at the bottom of the coffee maker.
NOTE!
Only the attached scale deposit scraper should be used!
o Place a cloth soaked with soapy
steel wool or a thin cloth for
scrubbing over the heating hole.
o Insert the narrow end of the
scraper into the heating hole.
o By rotating repeatedly clean
heating hole.
o When the heating hole is clean,
the metal will shine.
o After completion of cleaning, thoroughly rinse the water container in order to remove
all residues of soaps and cleaning detergents.
Scale deposit
scraper
Heating hole
- 33 -