EWT ZEPHYR Manuel D'utilisation page 12

SPECIFICATIONS
Model
LED screen
Modes
Temperature display
Ionic technology
Remote control tidy
Aroma diffuser case
Speed number
Oscillation
SMART tilting
Handle
Timer
Remote control Yes – (Included batteries – CR2025)
Power
Voltage
Frequency
Product dimensions (LxWxH)
Product weight
ASSEMBLY
The stand (4 and 5) for the upright comes in two parts which
can be very easily fitted around the base of the appliance.
One part of the stand (4) should be placed on the front of the
appliance base and the second section of the stand (5) - the
one with the opening on the outside for the electrical cable
(6) - should be placed at the back.
STEP 1 :
Firstly, attach the front part of the stand (4), making sure that
the electrical cable (6) goes through the central opening of
the stand. Line up the holes into which the fastening screws
will be inserted on the stand above the base of the upright.
STEP 2 :
Secondly, slot the back section of the stand (5) into the front
section of the stand (4). Tighten the four fastening screws
(7) firmly.
Ensure that the electrical cable (6) goes through the central
hole in the stand and that it goes through the opening at the
12
Zephyr.indd 12
back of the stand when the appliance is placed upright on a
flat floor.
ZEPHYR
Yes : touch control INSTRUCTION FOR USE
4 (Normal, Natural,
Night, Child Security) 1. Please read these instructions carefully before using the
Yes appliance and keep them in case of future use.
Yes 2. Make sure that the voltage of your local electricity network
Yes corresponds to the one which appears on the appliance.
Yes 3. Before using it for the first time, remove the appliance's
3 protective tabs and stickers.
Yes : automatic
Yes : manual Place your appliance on a flat floor and plug the appliance
Yes into the electrical supply (220-240V, 50Hz) using the electrical
12H cable.
45W You can control your appliance by using the touchscreen
220-240V~ control panel (1) located at the top of the stand or by using
50HZ the remote control.
L31 x W31 x H107,5 The LED display screen can be temporarily switched off by
4,30kg pressing the LED screen On/Off button (F) on the remote
control or by pressing the ventilation speed control button (E)
for more than 3 seconds on the control panel.
A. Appliance On/Off
B.Ventilation mode control
C.Oscillation On/Off
D.Timer
E.Ventilation speed control
F. LED screen On/Off
G. Ionic function On/Off
FR EN NL
www.ewt-france.com
26/11/18//48 12:26
App
Switch
off by p
M Ven
Nor
Mode i
When t
be set
be regu
Nat
Mode i
When t
betwee
- for pe
Nig
Mode i
When t
speed,
Medium
stages
stop fu
mode o
30 min
When t
by pres
Ch
Mode i
The tim
3 hour
applian
cycle b
speed,
Osc
Press t
second
The ve
manua
applian
around
simply
Tim
The ap
program
1 and 1
will be
Every t
In orde
www