Haverland TTPLUS Manuel D'installation Et Utilisation page 33

3. OPERATION
Programming
Mode
In programming mode,
the radiator can be in
a comfort, economy or
anti-freeze cycle.
Confort Led
Economy Led
Economy
Led flashing:
antifreeze
Remember that you can switch to "anti-freeze mode" by pressing the
For an efficient use of your radiator, we recommend using the programming mode.
Programme your radiator with the specific times that you require heating in the room.
3.5 MANUAL MODE
Manual
Mode
Hand LED
switched on
The comfort (sun) and
economy (moon) LEDs will
be switched off.
In manual mode, the radiator operates as an
ambient thermostat.
Once the manual mode has been chosen
(hand LED switched on), press the
button to configure the desired temperature.
After a few seconds, you will return to the
home screen where the room temperature of
the room will be displayed.
You can view the chosen temperature at any
time by pressing the
A bright blue dot will flash on
the right side of the screen
when the radiator is heating.
EN
button.
or
or button.
TTPLUS
33
EN