Instructions For Installation - Haverland TTPLUS Manuel D'installation Et Utilisation

EN

2. INSTRUCTIONS FOR INSTALLATION

cleaned (follow the steps given in the "maintenance section").
This cleaning operation will avoid burning the accumulated
dust and other remains.
• This radiator CAN'T OPERATE with external programmable
controllers or any other exterior control device.
• CAUTION: Keep bags and other accessories well out of the
reach of children.
• The convection effect, together with other ambient factors,
can cause discolouring to metal surfaces and to plastics.
• Temperature differences can cause crackling and other noises
in the unit. This does not indicate any failure in the radiator.
• This radiator is filled with a precise amount of special oil that
does not need any maintenance.
• The regulations on discarding oil when the heater is being
disposed of must be observed.
• When the radiator is disposed of, the requirements established
by current legislation on waste processing and recycling shall
be taken into account.
IMPORTANT
• It is important that the radiator IS FIXED
FIRMLY TO A SOLID AND LEVELLED
WALL.
• Make sure that there is a socket near the
area where you are going to place it.
• Take out the wall pattern from the box to
see the exact positions of the necessary drill
holes.
• You must keep a minimum distance of 15 cm
between the radiator and any object, wall or
combustible material.
TTPLUS
28