Safety; Improper Use; Personnel Qualifications; Residual Risks - Trotec TTK 400 Manuel D'utilisation

Safety

Read this manual carefully before starting or using the
device. Store the manual near the device or its site of use!
• Do not use the device in potentially explosive rooms.
• Do not use the device in atmospheres containing oil, sulphur,
chlorine, acid or salt.
• Do not operate the device in rooms which are pressurised with
acetone, undiluted acids or solvents.
• Set the device in an upright and stable position.
• Do not expose the device to directly squirting water during op-
eration.
• Ensure that the air inlet and outlet are not obstructed.
• Ensure that the side of the device where the air inlet is found
is kept free of dirt and loose objects.
• Never insert objects or limbs into the device.
• Do not cover or transport the device during operation.
• Do not sit on the device.
• Ensure that all electric cables outside of the device are protect-
ed from damage (e.g. from animals).
• Only use extensions to the electric cable which are appropriate
to the device power consumption, the length of its cable and
its use. Avoid electrical overload.
• Only transport the device in an upright position with an emp-
tied condensation pump and tray.
• Dispose of the collected condensation. Do not drink it. There is
a risk of infection!
B - 6
Intended use
Only use the device TTK 400 as a mobile industrial dryer for drying
and dehumidifying room air, while adhering to and following the
technical data.
Intended use encapsulates:
• drying and dehumidifying:
– production plants, underground rooms
– store rooms, archives, laboratories
– rooms and areas after water damages from burst pipes or
flooding
• maintaining the dryness of:
– instruments, devices and files
– electric control devices, boiler plants, turbines and pipe sys-
tems in power plants
– moisture-sensitive loads etc.

Improper use

Do not place the device on flooded ground. Do not use the device
outdoors. Do not lay any objects, e.g. wet clothing, on the device
for drying. Any changes, modifications or alterations to the device
which have not been authorised by TROTEC

Personnel qualifications

People who use this device must:
• be aware of the dangers that occur when working with electric
devices in damp areas.
• take measures to protect themselves from direct contact with
live parts.
• have read and understood the operating manual, especially the
"Safety" chapter.
Maintenance tasks at the electrical equipment or the air-
conditioning technology must only be carried out by
specialist companies for cooling and air-conditioning or by
®
TROTEC .

Residual risks

Hazardous electric current!
Work on the electrical components must only be carried
out by an authorised specialist company!
Hazardous electric current!
Before any work on the device, remove the mains plug
from the mains socket!
Caution!
To avoid damages to the device, never operate the
device without an air filter inserted!
Operating Manual – Construction dryer TTK 400
®
are forbidden.
EN