Instructions For Use - Rotel U753CH3 Mode D'emploi

• INSTRUCTIONS FOR USE

o Before using the fan make sure that it stands on a flat and stable surface.
o Damage may occur if it is placed on an incline or decline.
o Set all the switches to OFF position, then insert the plug directly into a standard AC
socket-outlet. Be sure that the plug fits tightly into outlet.
 Press the On button to start the fan and select the fan speed level, as per the
following sequence: 1 > 2 > 3 > 4 > 5 > 6 > 1
The fan speed selection can be circulated and the speed pilot lamp will be on
during operation.
 Press the Mode button to choose your desired wind mode as per the following
sequence: normal > wind > natural wind > sleeping wind > normal wind
The wind mode selection can be circulated and the wind mode pilot lamp will be
on during operation.
 Set the time by pressing the Timer button to select a desired timing level, the
range is between 1-15 hours. The pilot light corresponding to the selected tim-
ing level will be illuminated.
 Press the OSC button to select whether you need to let it oscillate, as per the
following sequence: oscillating> not oscillating> oscillating
o Press the OFF button to turn off the fan. All pilot lights will go off.
o Note: All of the above functions can be operated via the remote control.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
27