Ivoclar Vivadent Programat EP 3010 Mode D'emploi page 7

3. Operation
Start-up
Connect the power cord with the wall socket and put the On/Off switch
at the rear of the furnace to position "I".
After the self-test is completed, the furnace
will automatically display the screen to select
the desired operating mode. Select the firing
or press mode.
3.1 Operation in the FIRING mode
Step 1:
Select the program type.
The furnace offers several types of
programs:
– firing programs for Ivoclar Vivadent
materials
– 300 free, individually adjustable firing programs
Step 2:
Select the program group.
The program types are subdivided into
program groups. Each program group
consists of 20 programs.
Step 3:
Select the desired firing program.
In this screen, firing programs can be started
or edited.
Step 4:
Edit the firing program.
To edit a parameter, press the respective
button and enter the desired value.
Subsequently, confirm the entry by pressing
the green button.
When the furnace is delivered ex factory,
Ivoclar Vivadent programs are write-
protected. The write-protection can be
deactivated in the Options menu, where
additional program options are available.
Step 5:
Load the furnace and start the program.
Open the furnace head using the OPEN FURNACE HEAD key and position
the firing tray with the object in the furnace. Activate the program by
pressing the START key.