Technical Features - Bartscher K7EBM05VV Mode D'emploi

(Table 1) TECHNICAL FEATURES
Model
K7EBM05TT Electric bain maries 1/2 unit Top
K7EBM10TT Electric bain maries 1 unit Top
K7EBM05VV Electric bain maries 1/2 unit on Cabinet
K7EBM10VV Electric bain maries 1 unit on Cabinet
K7EBM05PP Electric bain maries 1/2 unit on Cabinet with door
K7EBM10PP Electric bain maries 1 unit on Cabinet with doors
WARNINGS
General
• Read the instructions carefully before installation, use and maintenance of the appliance.
• Installation must be carried out by qualified personnel following the manufacturer's instructions
in the specific manual.
• The appliance must only be used by trained personnel and only for the intended use.
• In the event of breakdown or malfunctioning, switch off the appliance and call in after sales
assistance only from an authorised centre.
• Use only original spare parts; otherwise no liability is accepted by the manufacturer.
• The appliance must not be washed with high pressure water sprays, neither must the openings or
air fumes on heat inlets/outlets be blocked.
ATTENTION! The manufacturer declines any liability for damage caused by wrong
installation, tampering, making unauthorised changes, improper use, poor maintenance,
installation of non-original spare parts, not observing local norms, incorrect use or not
observing the instructions in this booklet
For the installer
• The functioning of the appliance must be explained and shown to the user. After having ensured
that everything is clear, the instruction booklet must be handed over.
The following instructions for set up and functioning refer to electric appliances. The data plate
with all the information to refer to regarding the appliance, is situated inside the right or left side of
the control panel, depending on the model.
The appliances have been checked in accordance with the European directives below.
73/23/EEC - Low Tension (LVD)
89/336/EEC - Electromagnetic Compatibility (EMC)
93/68/EEC - Modifications to the directives
98/37/EC - Appliance to the directives
Description

TECHNICAL FEATURES

Elect.
Tension
Dimensions Power.
(F)
LxDxH [mm] (E)
[V]
[Kw]
400x700x295 1.0 230
800x700x295 2.0 230
400x700x845 1.0 230
800x700x845 2.0 230
400x700x845 1.0 230
800x700x845 2.0 230
Pag. 20/40
Water
Freq. Cable Type Supply
(G) H07 RN-F Pressure
[Hz] [mm2] MAX
[bar]
50 3x1 3
50 3x1 3
50 3x1 3
50 3x1 3
50 3x1 3
50 3x1 3
Water Connector
UNI-ISO 7/1 R ½
UNI-ISO 7/1 R ½
UNI-ISO 7/1 R ½
UNI-ISO 7/1 R ½
UNI-ISO 7/1 R ½
UNI-ISO 7/1 R ½