Appliance Start Up; Technical Features - Bartscher EROSBM Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The grounding line is marked by the colours yellow/green and must not be interrupted.
The device is provided with a cable in accordance with the CE regulations and with a
schuko plug (that can be replaced, when necessary, with a different plug, suitable for the
specified wattage and in accordance to the current regulations and guidelines; when
necessary, replace the provided cable with a new one with the same features).
Before switching the appliance
Check if the electrical system can withstand the appliance's load (WATT as indicated
on the technical plate)
Make sure that the electrical system is provided with ground connection according to
the current norms and guidelines.
Connect the appliance with the ground network through a cable connected to the
specific screw placed on the external casing of the appliance (See Component n°15
page. 6).

4.1 Appliance Start Up

Once ready to switch on the appliance, plug the device in the electrical system and turn
the thermostat knob to the desired temperature. If the switch light is turned on, the device
is working correctly and is reaching the selected temperature.
Once started up, the appliance reaches the selected temperature in about one hour (it
depends much on the starting temperature, the room temperature and the exposure of the
buffet trolley).the switch will turn off once the device has reached the selected temperature.
The appliance will keep the temperature during the service time.
The infrared lamps have an independent system and are managed from the switch located
beside the thermostat plastic knob.
This buffet trolley has been designed and created to work exclusively
through the "bain-marie" system, therefore It shall never be turned on
when without water in the tank.

4.2 Technical Features

EROS BM & B/INFRA
Power supply
Temperature Range
Range operating temperature
Infrared lamps
Tank capacity
Tank height (mm))
Weight (Kg)
3/1
4/1
230 V
230 V
+30°/+90°C
+30°/+90°C
+30°/+90°C
+30°/+90°C
3x250W
4x250W
3 x GN 1/1
4 x GN 1/1
180
180
120
170
3
5/1
6/1
230 V
230 V
+30°/+90°C
+30°/+90°C
+30°/+90°C
+30°/+90°C
5X250W
6X250W
5 x GN 1/1
6 x GN 1/1
180
180
200
220

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Erosb/infra

Table des Matières