Cleaning and maintenance
en
Changing the activated charcoal filter (only in
circulating-air mode)
To ensure effective odour removal, the filters must be
serviced regularly.
The activated charcoal filters must be replaced at least
every 3 to 5 months.
Notes
The activated charcoal filters are not included with
■
the appliance. Activated charcoal filters are available
from specialist retailers, from our after-sales service
or from our online shop.
The activated charcoal filters cannot be cleaned or
■
reactivated.
Remove the metal grease filter; see above.
1.
Turn the old activated charcoal filters and pull them
2.
from the holder. ¨
Push the new activated charcoal filters onto the
3.
holder and turn. ©
Cleaning the metal grease filter
Notes
Do not use any aggressive, acidic or alkaline
■
cleaning agents.
When cleaning the metal mesh grease filters, also
■
clean the holder for the metal mesh grease filters in
the appliance using a damp cloth.
The metal mesh grease filters can be cleaned in the
■
dishwasher or by hand.
By hand:
You can use a special grease solvent for
Note:
stubborn dirt. It can be ordered via the Online Shop.
Soak the metal mesh grease filters in a hot soapy
■
solution.
Clean the filters with a brush and then rinse them
■
thoroughly.
Leave the metal mesh grease filters to drain.
■
In the dishwasher:
If the metal mesh grease filters are cleaned in the
Note:
dishwasher, slight discolouration may occur. This has
no effect on the function of the metal mesh grease
filters.
Do not clean heavily soiled metal mesh grease filters
■
together with utensils.
Place the metal mesh grease filters loosely in the
■
dishwasher. The metal mesh grease filters must not
be wedged in.
8
Installing the metal grease filter
With the lock facing the front, insert the metal grease
filter into the underside of the appliance and engage the
lock.
When pushing the filter in, make sure the lock
Note:
engages. Otherwise, the metal grease filter may fall and
damage the hob.