Horizontal Ducting Conversion - Zephyr Tempest II AK7500CS Guide D'utilisation, D'entretien Et D'installation

ZEPHYRONLINE.COM

Horizontal Ducting Conversion

This range hood is equipped standard with a 8" round vertical duct option. To convert from 8" round
vertical to 8" round horizontal ducting or 3-1/4" x 10" rectangular horizontal ducting please following
the instructions below.
B
Tempest II Use, Care, and Installation Guide
Installation Instructions
1. Disconnect blower plug.
2. Remove (4) screws from interior
of hood body attaching single
blower plate to top of hood body.
Remove single blower and single
blower plate.
3. Knock out rear plate B for rear
rectangular rear ducting or plate
C for 8 inch round rear ducting.
C
19