Horizontal Ducting Conversion - Zephyr Siena ZSI-E30CS Guide D'utilisation, D'entretien Et D'installation

ZEPHYRONLINE.COM
Mounting the Hood
11. Place telescopic duct covers onto hood and extend inner (top) duct cover upwards and secure to
duct cover bracket using (2) M4x8 screws.
*If using hood in recirculating mode you must secure air diverter plate onto wall before installing
duct work and duct covers. Turn to ductless recirculation section for more details.

Horizontal Ducting Conversion

This range hood is equipped with a 8" round vertical duct option by default. To convert from 8" round
vertical to 8" round horizontal ducting or 3-1/4" x 10" rectangular horizontal ducting, please follow the
instructions below.
Siena Use, Care, and Installation Guide
Installation Instructions
1. Remove (4) screws attaching
motor to hood body.
2. Remove knock out plates A & B for
rectangular ducting or knock out
plates B & C for round ducting.
15