Specifications - CAMPAGNOLO ErgoBrain Manuel D'instructions

Have you changed the cog set?
If CDC sensor is on, do the updating operation according to the instructions in
page 13.
If CDC sensor is off, push SET button and input the sprocket's combination or
number of teeth again (page 6).
The screen does not match with the shift timing of the front derailleur.
Have you adjusted front derailleur or replaced the chainring?
Push SET button and set the chainring's shift timing again (page 7).
[Error] appears on the screen when setting the chainring's shift timing.
Is the sensor wire of one of the ErgoPower lever broken?
Replace the bracket set with a new one.

Specifications

Display functions
Current speed
Timer
Average speed
Max. speed
Trip distance
Total distance
Gear deveropment
Clock time
Cadence
Stopwatch
STW•Average speed
STW•Max. speed
STW•Trip distance
Additional features
Control system
Display system
Speed/Cadence signal
detection system
Operating temperature range
Storage temperature range
Wheel circumference range
Gear number of teeth range
Applicable fork diameter
Power supply
Battery life
Dimensions/Weight
* Design and specifications are subject to change without notice.
- 15
UK
Icon
TM
AV
MX
DST
ODO
G.D.
STW
STW-AV
STW-MX
STW-DST
Pace arrow Indicates whether the speed is higher or lower
Self learning Automatically calculates sprocket's number of
The life of the first factory-loaded battery may be shorter than this period.
Range / Standard accuracy
0.0(4.0) - 110.7 km/h [mph] / ±0.5 km/h[mph]
0:00'00" - 99:59'59" / 0.003%
0.0 - 110.7 km/h [mph] / ±0.5 km [mph]
0.0(4.0) - 110.7 km/h [mph] / ±0.5 km/h [mph]
0.00 - 9999.99 km [mile] / ±0.01 km [mile]
0.0 - 99999.9 km [mile] / ±0.1 km [mile]
0.64- 14.99 m [25 - 590 inch] / ±0.01 m [1 inch]
0:00'00" - 23:59'59"
[1:00'00" - 12:59'59"] / ±0.003%
0(20.0) - 299.0 rpm / ±1 rpm (under 199rpm)
0:00'00"0 - 99:59'59" / 0.003%
0.0 - 110.7 km/h [mph] / ±0.5 km [mph]
0.0(4.0) - 110.7 km/h [mph] / ±0.5 km [mph]
0.00 - 9999.99 km [mile] / ±0.01 km [mile]
than average speed
teeth
4-bit one-chip microcomputer, crystal oscillator
Liquid crystal display
Noncontact magnetic sensor
0°C - 40°C [32°F - 104°F]
–20°C - 50°C [–4°F - 122°F]
1600 - 2499 mm / Initial value:2096
Chainring's: 30 - 56
Sprocket's (cog set's): 11 - 31
11Ø - 36Ø
CR2032 x 1
Approx. 1.5 years (When using 1 hour/day)
54.0 x 47.5 x 20.7 / 36 grams [1.27 oz]