Input Wheel Circumference; Select Cadence On/Off; Select Chainring - CAMPAGNOLO ErgoBrain Manuel D'instructions

3. Input wheel circumference.

Start with wheel A. Push MODE button to increase the digits, and S/S
button to decrease.
To input your second bicycle's wheel circumference (wheel B), hold
down SET button.
Push SET button to fix.
3
To the next step

4. Select cadence on/off.

If you use the cadence sensor on your bike, select [ON], and if not,
select [OFF] by the push of MODE button. Push SET button to fix.

5. Select chainring.

Select the number of chainrings (2 or 3) by the push of MODE button.
Push SET button to fix.
- 5
UK
S/S
SET
2sec.
SET
4
SET
5
SET
Increases digits
MODE
Decreases digits
Switches between A and B
MODE
MODE