VINCENT SA-T1 Manuel D'utilisation page 24

10
10. INPUT: input connectors
Here you find six stereo RCA inputs for the source
equipment with analogue stereo (line level) audio
output.
11. OUTPUT REC: recording output
If desired, you can connect a recording device
like a CD recorder or a tape recorder to this out-
put. The stereo signal of this output is identical to
the output signal of the selected audio source at
one of the preamplifier INPUTs. As long as the
preamplifier is muted (15), the output "OUTPUT
REC" does not provide the music signal.
12. OUTPUT: preamplifier outputs
With these two pairs of RCA connectors you can
output the preamplified stereo audio signal of the
currently selected source to the power amplifier
channels. The volume setting, mute status, tone
settings as well as the Loudness function have
effect on the signal at this output.
Vincent
24
REAR VIEW
11
13. FUSE: Fuse holder
14. AC 220-240V: Power Connector
12
This small plastic housing holds the fuse. Refer to
the security precautions.
To establish the power supply, connect the plugs
of the power cable to the device and to a suitab-
le wall outlet.
13
14