Adjust The Volume - Sony VPL-SC60U Mode D'emploi

To get the clearest picture
4
Turn the zoom ring to adjust the size of the picture.
5
Turn the focus ring to adjust the focus.
Note
Do not look into the lens when the projector lamp is on.
To

Adjust the volume

Cut off the sound
Cut off the picture
You can get the suitable picture when a signal from the computer is input.
Press the APA key on the Remote Commander or on the control panel.
The picture is automatically adjusted to be projected clearest.
Notes
• Adjust the signal when the still picture is displayed on the screen.
• If you switch the input signal or re-connect a computer, press the APA
key again to get the suitable picture.
• "ADJUSTING" appears on the screen. Press the APA key again during
the adjustment to restore the original screen.
• "Complete!" appears on the screen when the picture is adjusted properly.
The picture may not be adjusted properly depending on the kinds of input
signals.
• Adjust DOT PHASE in the INPUT SETTING menu when you adjust the
picture manually.
For details on DOT PHASE, see page 28 (GB).
Press
the VOLUME +/– keys on the control
panel or on the Remoter Commander.
the AUDIO MUTING key on the
Remote Commander. To restore the
sound, press the AUDIO MUTING key
again or press the VOLUME + key.
the PICTURE MUTING key on the
Remote Commander. To restore the
picture, press the PICTURE MUTING
key again.
23
(GB)