Dehumidifier Mode; Fan Mode; Night Mode - EWT SNOWAIR9H Manuel D'utilisation

- The symbol will appear on the display screen (3) to
indicate that the frost setting has been activated. When
the defrosting function of the appliance is active, you
will need to wait for a few minutes before the appliance
begins to work normally again.

FAN MODE

When using this mode, the drainage pipe (18) does not need
to be fitted.
• Pres the button until the
• Select fan speed by pressing the
Three speeds are available:
Three speeds are available:
Low speed: the appliance will operate silently
Medium speed: reduces the noise level but maintains a
certain level of comfort
Maximum speed: maximum power of the fan
www.ewt-france.com
or or symbol appears.
button.

DEHUMIDIFIER MODE

Ideal for reducing the level of humidity in a room (spring and
autumn, damp rooms, rainy spells...).
When set to dehumidifier mode, the appliance will need to
be fitted with the drainage pipe (18) to allow water to be
evacuated outside. To set this mode correctly:
• Press the button until the
• Select the fan speed by pressing the
Three speeds are available:
AUTO-ECO automatic speed: the appliance will
automatically adjust ventilation speed according to the
temperature selected
OSCILLATION
This function is useful for selecting the angle or oscillation
mode of the deflector: air flow upwards or downwards
Position of the deflector in oscillation mode
To set this option correctly:
• Select use mode (air-conditioner, heating, dehumidifier,
fan) as described above.
• Then press the button on the remote control to set
automatic oscillation by the deflector

NIGHT MODE

This function is useful during the night as it reduces the
appliance's power consumption.
To set this function correctly:
• Select the air-conditioner, heating or dehumidifier mode
as described above.
• Press the .button.
• The appliance will function in the mode previously
selected.
• When you select night mode, the brightness of the screen
is reduced.
FR EN NL
symbol appears.
button.
25