EWT SNOWAIR9H Manuel D'utilisation page 19

via an external switch such as a
timer or a remote-control system
or connected to a circuit which is
regularly switched on and off by
the electricity supplier.
• Do not
appliance. Regularly check that
the appliance and its power
cable are not damaged. If the
electrical cable is damaged,
the manufacturer, by a certified
technician or any other qualified
person in order to avoid all risks,
must replace it.
• Connect the appliance to a 230-
volt alternating current power
supply.
• Only connect the appliance to an
electrical supply, which complies
with all applicable standards and
has a delayed circuit breaker.
Check that the maximum power
of all of the appliances connected
to this power supply does not
exceed the maximum capacity of
the circuit breaker (16A).
• A qualified professional must
carry out repairs to electrical
appliances. Incorrectly carried
out repair work can cause major
risks for users.
• Do not use a multi-socket,
extension lead or adaptor when
www.ewt-france.com
use a damaged
plugging the appliance in as there
is a potential risk of overheating
and fire.
• For safety reasons, unplug the
appliance when it is not being
used and when no one will be
present to supervise it for a long
period.
• Never pull on the cable – unplug
the appliance by pulling on the
plug itself.
• Do not use the appliance if
the power cable is under the
appliance. The plug must be
accessible once the appliance is
installed.
• Never pull on the power cable
to move the appliance. Always
ensure that the power cable is
unconstrained when you move
the appliance. Never wrap
the power cable around the
appliance.
• Ensure that the cable does not
risk tripping anybody up.
• Do not cover the power cable
with a rug, carpet, blanket
• Always hold the plug when you
plug in or unplug the appliance.
Never unplug it by pulling on
the power cable. Risk of electric
shock and damage.
• Switch the appliance off before
FR EN NL
.
19