2. Precautions
The 4-Channel MJPEG digital recorder LAN and connected components must be kept free of
moisture (cellars and similar surroundings are to be strictly avoided). Use of this product for
other than the described purpose may lead to damage of the product. Other hazards such as
short-circuiting, fire, electric shock, etc., are also possible. The recorder is designed for
operation with a transformer for main electricity at 230 Volt AC / 50 Hz.
No part of the product may be changed or modified in any way. Connection to the public power
network is subject to country-specific regulations. Please be aware of applicable regulations in
advance.
To avoid fire and injury,
please observe the
following:
• Securely fasten the
device at a dry location in
the building.
• Make sure there is
sufficient ventilation.
• Do not expose the device
to temperatures less than
0°C or more than 55°C.
• The device is designed for
indoor use only.
• The maximum humidity
must not exceed 85%
(non-condensing).
• Ensure that the voltage is
disconnected when
performing work on the
device.
Please observe the
following regulations to
ensure trouble-free
operation of your
device.
• The 4-Channel MJPEG
digital recorder LAN is
supplied by a 12V DC
transformer.
The device should be
connected via a separate
fused line to the local
230V AC network.
• Connecting the device to
the local mains network is
subject to country-specific
regulations.
33
General:
Improper or careless
installation work may lead to
faults and poor image quality.
Therefore please read the
instructions very carefully and
follow the installation
instructions for lines and
components precisely.
The manufacturer reserves
the right to make technical
modifications at any time.