Using The Remote Control; Remote Controller Specifications - Danby DAC080EB2GDB Guide D'utilisation Et Soins De Propriètaire

Operating Instructions
USING THE REMOTE
CONTROL
REMOTE CONTROLLER
SPECIFICATIONS
While the Air Conditioner is on (Auto-Off):
1) Press the Auto-Timer button twice and the adjacent Auto-Off indicator
light will illuminate.
2) Use the Temp/Timer control cursors to select a delayed Off time of up
to 24 hours.
3) The time you selected will appear in the LED display. The Auto On and
Auto Off timer can operate during the same program by defining the
Auto-Off parameters immediately after the Auto On parameters.The
Auto-Timer may be cancelled at any time by turning the unit On/Off.
For example,if you want to let the machine on one hour later and last
for one hour and then stop,set auto on "1" and auto off "2".
Location of the remote controller.
• Use the remote controller within a distance of 8
8m
• The air conditioner will not operate if curtains, doors or other
materials block the signals from the remote controller to the
indoor unit.
• Prevent any liquid from falling into the remote controller. Do not
expose the remote controller to direct sunlight or heat.
• If the infrared signal receiver on the indoor unit is exposed to
direct sunlight, the air conditioner may not function properly. Use
curtains to prevent the sunlight from falling on the receiver.
• If other electrical appliances react to the remote controller, either
move these appliances or call the service depot.
Model
Rated Voltage
Battery Type
Battery Quantity
Lowest Voltage of
CPU Emitting Signal
Signal Receiving Range
Environment
8
meters from the appliance, pointing it towards
the receiver. Reception is confirmed by a beep.
CAUTION
R15B
3.0V
Button cell: CR2025
1pcs
2.0V
8m
-5°C to 60°C