Cola TERMO FOCUS HR Manuel D'installation, D'utilisation Et D'entretien page 46

The appropriately wrapped and protected cover is inside the packing: unpack it carefully, check the integrity of the
part and install it after placement of the stove, as follows:
X
-check the screws in the threaded inserts on the bottom of the cover and adjust the distance for inserting the top
stove supports in the slots.
Y
-fit the cover from the rear side, inserting the screw heads in the respective seats of the supports as shown in the
figure.
Z
-secure the cover in place, fixing the rear stops as shown in the figure.
X
DETAIL A
Fixing screws
SCALE 1:2
Y
SCREW INSERTED
DETAIL A
SCALE 1:2
Z
Rear stops
46
TERMO-FOCUS HR