Cola TERMO FOCUS HR Manuel D'installation, D'utilisation Et D'entretien page 45

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Every installation must provide for an easily accessible technical space for periodical maintenance.
The stove is provided with 4 adjustable feet to facilitate positioning on not perfectly flat floors. To adjust the height, tilt
the stove slightly and turn the feet as required.
The stove is supplied with the ambient sensor fixed through a wrapper on the back of the stove; we recommend to
remove the wrapper and to locate the sensor in the best position possible as to improve the temperature registration
in accordance with the ambient context and the length of the cable.
As for temperature registration done at a certain distance we reccomend to install the ambient thermostat/ambient
programming clock-thermostat – see. par.4.8.
-The stove cannot be installed in bedrooms, bathrooms and in general in rooms where another heating
unit
is already installed without an independent air inflow.
- With wooden floors, install a floor protection base in conformity with the current regulations.Suitable fire-
prevention devices should be arranged for any eventuality.
- Do not install the stove in places with an explosive atmosphere.
Antiwind
grille
Flue
Flue connection
Inspection door on
flue
Wall air inlet
min. 100 cm²
T union with
inspection cap
Floor protection base
45
A = 200 mm
B = 200 mm
C = 1500 mm
D = 200 mm
TERMO-FOCUS HR

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ls05d00yLs05a00y

Table des Matières