Spypoint LIVE-3G Manuel D'utilisation page 9

Masquer les pouces Voir aussi pour LIVE-3G:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

16
Select or cancel printing the date, time,
Stamp:
(Yes/No)
temperature and moon phases on photos.
New moon:
Waxing Crescent:
First Quarter:
Waxing Gibbous:
Full moon:
Waning Gibbous:
Last Quarter:
Waning crescent:
Changes the temperature display.
Temp.
format:
(°F/°C)
Sets the display language of the camera's menus.
Language:
(English/Français/
Deutsch)
In case of theft, this option allows the camera to
Theft alert:
(Yes/No)
switch into an alert state.
• The user receives an alert message to his email
address or by an SMS message to his cellphone
(fees may apply for SMS messages) giving
information about when the camera was moved
for the last time (See SMS CONFIGURATION
for
details).
• The latest recorded photos are sent on
user's account starting with the most
Note: Photos are sent in «Large» format only.
• If
« My camera was stolen» is checked on the
mySPYPOINT
the interface of the camera is locked and the
GPS coordinates continue to be sent every 10
minutes to locate the camera.
the
recent.
account in «Status» section,
Sets the operating mode of the camera.
Mode:
(Standalone/
Cellular/Security)
When «Standalone» mode is activated:
• The camera operates normally by recording
photos or videos locally on the memory card.
• The
options
«Synchronize»,
«Transmit format» are disabled since no
cellular communication is performed in this
mode.
• The presets of the «Time Lapse» option are
reduced to 15s/30s/1min/5min/10min/30min/
1h/2h. (See the option «Time Lapse»)
When «Cellular» mode is activated:
(A subscription to mySPYPOINT
visit www.myspypoint.com for details)
• The
camera
transmission
with mySPYPOINT
presets of the options «Synchronize» and
«Synchronize at».
• Videos cannot be sent to the mySPYPOINT
user's account.
• Photos are also stored locally on the memory
card.
Note: In Cellular mode, it is recommended to
use an external 12-volt input (BATT-12/KIT-
12V/AD-12V, sold separately) in order to get
best results and longer battery life (see «Power
Supply» for details).
«Theft
alert»,
«Carrier»,
«Synchronize
at»
and
is required,
operates
in
cellular
mode
and
communicates
server following the
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

S-live-3g

Table des Matières