Installing The Sim Card; Power Supply - Spypoint LIVE-3G Manuel D'utilisation

6
CONTENTS
• SPYPOINT LIVE-3G or S-LIVE-3G
®
• 3G cellular antenna
• Installation strap
• USB cable
• Audio-video cable
• User Manual

INSTALLING THE SIM CARD

Insert your SIM card into the compartment provided for this
purpose in your camera. The SIM card compartment is located
under the batteries. You need to use a Phillips screwdriver to open
and close the compartment.
1. Unscrew the cover screw using a Phillips screwdriver.
2. Slide the metal bracket in the OPEN position.
3. Lift up the metal bracket.
4. Insert the SIM card as indicated.
5. Lower the metal bracket and slide it to the LOCK position .
6. Close the compartment cover.

POWER SUPPLY

The battery level is shown in the upper left corner of the screen
when the camera is in TEST mode. When a single line remains, the
camera will continue to take pictures but we strongly recommend
changing the batteries before they are empty (see figure below).
AA BATTERIES
This camera requires the use of 8 AA batteries (1.5V). The use of
alkaline or lithium batteries is strongly recommended. Also note
that the voltage of rechargeable AA batteries (1.2V) is insufficient
to power this camera. During the installation of the AA batteries,
place the switch inside the battery case to ALK (i.e. alkaline). Insert
the batteries in the camera as indicated. Exact polarity must be
followed. We also recommend the use of new batteries to ensure
maximum performance of your camera.
7