Solar Panel - Spypoint LIVE-3G Manuel D'utilisation

Masquer les pouces Voir aussi pour LIVE-3G:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

8
LITHIUM BATTERY PACK
The camera can be powered by a rechargeable lithium battery pack
LIT-09/LIT-C-8 (sold separately, see OPTIONS). This type of
battery is less affected by cold temperatures and lasts up to 3 times
longer than alkaline batteries. During the installation of the lithium
battery, place the switch inside the battery case to LIT-09. Insert the
batteries in the camera as indicated (see figure below).
EXTERNAL
The camera can also be powered from an external 12-volt DC input
such as a 12-volt battery (BATT-12/KIT-12V, sold separately) or a
12-volt adapter (AD-12V, sold separately). During the installation of
a 12-volt connection, slide the switch inside the battery case to ALK
(the AA batteries can remain safely inside the camera). If combined
with a lithium battery pack, slide the switch to LIT-09. To find the
accessories available, see OPTIONS.

SOLAR PANEL

This model offers the possibility of a connection to a solar panel
SP-12V (sold separately, see OPTIONS) to maintain the charge
of the lithium battery pack LIT-09/LIT-C-8 (sold separately, see
OPTIONS). During the installation of the rechargeable lithium
battery pack, slide the switch inside the battery case to LIT-09 to
activate the charging system of the solar panel.
RESET
ALK
LIT-09
Power source
• 8 AA
• 12V
• 12V + 8 AA
• LIT-09
• 12V + LIT-09
• Solar panel + LIT-09
MEMORY STORAGE
Using a memory card (sold separately, see OPTIONS) is required
to operate the camera. When the PHOTO or VIDEO mode is
selected, the screen displays «No memory card» if no memory card
is present. The camera is compatible with SD/SDHC memory card,
up to 32 GB capacity. Before inserting or removing a memory card,
the camera must be turned off. Failing to do so may cause loss of
pictures or damage the pictures already recorded on the memory
card. When the SD card is full, the viewing screen indicates
«Memory card full» when the PHOTO or VIDEO mode is selected.
The used space on the memory card is displayed as percentage in
the upper right corner of the screen when the camera is in TEST
mode. The following data shows the approximate quantity of photos
or video length that can be taken by the camera depending on the
memory card capacity.
2.0 GB
Photo
8 MP
1200
Video
640 x 480
65 min
«BUSY» LED
The «BUSY» light, located next to the screen, lights up when
the camera is recording.
Switch position
ALK
LIT-09
4.0 GB
8.0 GB
32 GB
2400
4800
19000
2h10
4h10
16h40
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

S-live-3g

Table des Matières