Spypoint LIVE-3G Manuel D'utilisation page 10

Masquer les pouces Voir aussi pour LIVE-3G:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

18
When «Security» mode is activated, the
operation is the same as in «Cellular» mode,
except:
• The camera makes a self check every minute
to verify if images have been taken. If so, the
camera will transmit to the mySPYPOINT
user's account.
• The
mySPYPOINT
presets of the options «Synchronize» and
«Synchronize at».
• If the option «Multi-shot» is enabled, the
transmission is performed once the series of
photos is recorded.
• The option
mySPYPOINT
can be activated via mySPYPOINT
(see "SMS Configuration" for details).
Note: Security mode is recommended for use
in areas where detections are rare and where the
camera can't be powered by a main electricity
supply. It is a good compromise between
security and battery life.
Allows the user to choose the country in which
Country
the camera is used. This option displays the list
of the corresponding cellular providers.
This setting must correspond with the user's
Carrier:
service provider. Choose the one corresponding
to the SIM card among the list of compatible
providers.
Sets the daily number of synchronisations
:
Synchronization
(1/2/6/12 times
between the camera and the server.
a day)
This option changes the frequency at which the
camera communicates with the mySPYPOINT
server in order to update its status or to send
photos on the user's account.
camera
still
communicates
server
following
«Security Alert» is available on the
user's account. This option
Synchronize
at:
with
the
only
Transmit
format:
(Thumbnails/
Large)
Defines at what time of day the camera
communicates
with
the
mySPYPOINT
server in order to update its status or
to send photos on the user's account.
(Over a period of 24 hours)
e.g.1: The option «Synchronize at» is set to
04:00 and the option «Synchronize» is set to 6/
day.
The camera performs 6 synchronisations per day
and begins its first transfer at 4h, then at 8h, 12h,
16h, 20h and 24h.
e.g.2: The option «Synchronize at» is set to
01:00 and the option «Synchronize» is set to 2/
day.
The camera performs 2 synchronisations per day
and begins its first transfer at 1h, then at 13h.
Sets the photo size sent to the mySPYPOINT
user's account.
Thumbnails: 160x120 pixels
Large: 640x480 pixels
Note: It is recommended to use the format
«Thumbnails», since many more photos can
be sent on the mySPYPOINT
in that format and thus, reduce the amount of
cellular data transmitted. The user can still, from
his account, choose among his «Thumbnails»
format photos which ones he wants to receive
in «Large» format in the next synchronisation of
the camera.
Note: If the camera is configured with the power
option «Electricity», the selected photos will
be transferred in «Large» format at the next
synchronisation.
19
user's account

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

S-live-3g

Table des Matières