Settings Menu - Spypoint LIVE-3G Manuel D'utilisation

12
How to properly install your camera
using the supplied installation strap:
(Recommended installation height: about 3 feet)
In TEST mode, it is possible to take a picture by pressing the
OK button. The photo is saved and appears in VIEW mode.
The «Test» mode also provides information on:
1. The battery level
2. The cellular signal strength
3. The used space on the memory card (as a percentage)
4. The GPS coordinates of the camera
1.
2.
4.
VIEW
Allows the user to view photos or videos on the built-in
3.5" screen of the camera or on a TV set.
Play:
Delete:
Delete all:
Format:
Note: Press the ▲ to enlarge the image on the screen or ▼ to return
to the original size. When the image is enlarged, use the navigation
buttons to adjust the position of the image.
With a TV set:
Allows the user to view photos and videos directly on a TV set.
Turn on the camera and plug the yellow end of the composite audio-
video cable supplied with the camera to VIDEO IN input of the TV
set and the other end into the TV OUT output of the camera. The
3. last picture or video recorded appears on the screen. To change the
photos or videos, use the
same as when viewing on the built-in screen of the camera (see
above).
Allows the user to set the advanced settings of the camera. To
configure the system in another language, press the
the option « Language » is highlighted. Press OK and modify the
selection with
The system will change all the menus in the selected language.
Navigating the menu:
• ▲
and
• ◄
and
With 3.5" built-in screen:
When VIEW mode is selected, the last recorded
image or video automatically appears on the screen.
◄ ►
Press the or button to view the next or previous
file. Press OK to see the different options available:
Plays or pauses the video on the screen.
(This option is available only for videos)
Deletes the photo or video displayed on the screen.
Deletes all photos and videos that were not
protected.
Deletes the entire contents of the memory card,
including protected files.
◄ ►
and button. The options are the

SETTINGS MENU

▲ ▼
or button. Confirm the choice by pressing OK.
▼
button to change settings
►
button to change pages
13
▼
button until