How To Remove And Install: Door - AEG BEE431011M Notice D'utilisation

Step 1 Turn off the oven and wait until it is
cold.
Step 2 Pull the front of the shelf support
away from the side wall.
Step 3 Pull the rear end of the shelf support
away from the side wall and remove
it.
Step 4 Install the shelf supports in the oppo‐
site sequence.

12.3 How to remove and install: Door

The oven door has three glass panels. You can remove the oven door and the internal glass
panels to clean them. Read the whole "Removing and installing door" instruction before you
remove the glass panels.
CAUTION!
Do not use the oven without the glass panels.
Step 1 Fully open the door and find the hinge to the
right side of the door.
Step 2 Use a screwdriver to lift and turn fully the
right side hinge lever.
Step 3 Find the hinge to the left side of the door.
Step 4 Lift and turn the lever fully on the left hinge.
22 ENGLISH
2
1