AEG BEE431011M Notice D'utilisation page 23

Step 5 Close the oven door halfway to the first
opening position. Then lift and pull forward
and remove the door from its seat.
Step 6 Put the door on a soft cloth on a stable sur‐
face.
Step 7 Hold the door trim (B) on the top edge of the
door at the two sides and push inwards to re‐
lease the clip seal.
Step 8 Pull the door trim to the front to remove it.
Step 9 Hold the door glass panels by their top edge
and carefully pull them out one by one. Start
from the top panel. Make sure the glass
slides out of the supports completely.
Step 10 Clean the glass panels with water and soap.
Dry the glass panels carefully. Do not clean
the glass panels in the dishwasher.
Step 11 After cleaning, install the glass panels and
the oven door.
2
B
1
ENGLISH 23