Canon EOS REBEL T6 (W) Mode D'emploi De Base page 36

3 Setting the Date, Time, and Zone
The date/time/zone settings may be reset in the following cases. If this
happens, set the date/time/zone again.
• When the camera is stored without the battery.
• When the camera's battery becomes exhausted.
• When the camera is exposed to below freezing temperatures for a
prolonged period.
The date/time that was set will start from when you press <0> in step 6.

After changing the time zone, check that the correct date and time are set.

34
Set the date and time.
4
Press the <Y> <Z> keys to select

the number.
Press <0> so <a> is displayed.

Press the <W> <X> keys to set the

number, then press <0>. (Returns
to <b>.)
Set the daylight saving time.
5
Set it if necessary.

Press the <Y> <Z> keys to select [Y].

Press <0> so <a> is displayed.

Press the <W> <X> keys to select

[Z], then press <0>.
When the daylight saving time is set

to [Z], the time set in step 4 will
advance by 1 hour. If [Y] is set, the
daylight saving time will be canceled
and the time will go back by 1 hour.
Exit the setting.
6
Press the <Y> <Z> keys to select

[OK], then press <0>.

The date/time/zone and daylight
saving time will be set and the menu
will reappear.