Canon EOS REBEL T6 (W) Mode D'emploi De Base page 32

Installing and Removing the Battery and Card
When the access lamp is lit or blinking, it indicates that images are

being written to, read from, or erased from the card, or data is being
transferred. Do not open the card slot/battery compartment cover.
Also, never do any of the following while the access lamp is lit or
blinking. Otherwise, it can damage the image data, card, or camera.
• Removing the card.
• Removing the battery.
• Shaking or banging the camera around.
• Unplugging and connecting a power cord (when household power
outlet accessories (sold separately) are used).
If the card already contains recorded images, the image number may not

start from 0001.
If a card-related error message is displayed on the LCD monitor, remove

and reinsert the card. If the error persists, use a different card.
If you can transfer all the images on the card to a computer, transfer all
the images and then format the card with the camera (p.44). The card
may then return to normal.
Do not touch the card's contacts with your fingers or metal objects. Do

not expose the contacts to dust or water. If a smudge adheres to the
contacts, contact failure may result.
Multimedia cards (MMC) cannot be used (card error will be displayed).

30