Canon EOS REBEL T6 (W) Mode D'emploi De Base page 143

Terminating the Connection
To terminate the connection, perform either of the following operations.
While connected, a picture cannot be taken even if the camera's shutter

button is pressed.
In remote shooting, the AF speed may become slower.

Depending on the transmission range and connection status, image

display may be delayed, images may not be displayed smoothly, shutter
release may be delayed, or other problems may occur.
Even if movies are displayed in the list, they cannot be saved to a

smartphone.
If you send RAW images to a smartphone, the high ISO speed noise

reduction effect of saved images on the smartphone may become
smaller. Therefore, if you shoot RAW images, setting the image-
recording quality to 1+73 is recommended.
The connection will also be terminated if you turn the Mode Dial or open

the card slot/battery compartment cover.
If you send RAW images to a smartphone, they will be resized to b and

saved.
While connected, the camera's auto power off does not function.

While connected, disabling the smartphone's power saving function is

recommended.
The camera's <k> lamp will blink rapidly when images stored in the

camera are being saved to a smartphone.
Operating the Camera Using a Smartphone
On the smartphone's Camera
Connect screen, tap [t].
Set the camera's power to
<2>.
W-27