Handling Precautions - Canon EOS REBEL T6 (W) Mode D'emploi De Base

Handling Precautions

Camera Care
This camera is a precision instrument. Do not drop it or subject it to physical

shock.
The camera is not waterproof and cannot be used underwater. If you

accidentally drop the camera into water, promptly consult the nearest Canon
Service Center. Wipe off any water droplets with a dry and clean cloth. If the
camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Never leave the camera near anything having a strong magnetic field such

as a magnet or electric motor. Also, avoid using or leaving the camera near
anything emitting strong radio waves, such as a large antenna. Strong
magnetic fields can cause camera misoperation or destroy image data.
Do not leave the camera in excessive heat, such as in a car in direct

sunlight.
The camera contains precision electronic circuitry. Never attempt to

disassemble the camera yourself.
Do not block the built-in flash or mirror operation with your finger, etc. Doing

so may cause a malfunction.
Use only a commercially-available blower to blow away dust when it adheres

to the lens, viewfinder, reflex mirror, focusing screen, etc. Do not use
cleaners that contain organic solvents to clean the camera body or lens. For
stubborn dirt, take the camera to the nearest Canon Service Center.
Do not touch the camera's electrical contacts with your fingers. This is to

prevent the contacts from corroding. Corroded contacts may cause camera
misoperation.
If the camera is suddenly brought in from the cold into a warm room,

condensation may form on the camera and internal parts. To prevent
condensation, first put the camera in a sealed plastic bag and let it adjust to
the warmer temperature before taking it out of the bag.
16