Packaging / Transport; Order Details - HYDAC ELECTRONIC HLT 2150-R1 Notice D'utilisation

HLT 2150-R1 analog

8 Packaging / Transport

Notes on packaging
Only use the original packaging!
The wrong packaging material can cause damage to the device during
transportation.
Notes on transportation
Do not drop the device or expose it to strong strokes!
Device contains a magnetostrictive sensor.
Only use the original packaging!
The wrong packaging material can cause damage to the device during
transportation.

9 Order details

Design/Geometry type
1 = Rod
Type
R1 = Rod with M18x1.5 screw-in flange
Electrical connection
006 = Male connector M12x1, 4 pole
Output signal
C01 = Analogue 4 .. 20 mA, 3 conductor
C02 = Analogue 20 .. 4 mA, 3 conductor
B01 = Analogue 0 .. 10 V
B02 = Analogue 10 .. 0 V
G01 = Analogue 0.25 .. 4.75 V
G02 = Analogue 4.75 .. 0.25 V
G03 = Analogue 0.5 .. 9.5 V
G04 = Analogue 0.5 .. 4.5 V
Measuring range in mm (50 to 2500 mm)
Example
0150 = 150 mm
Modification
000 = Standard
006 = Modified pin assignment
007 = Modified pin assignment
Edition: 2018-09-11
HLT 2 1 5 0 – R1 – 006 - XXX – XXXX – 000
HYDAC ELECTRONIC GMBH
15
E
Part No.: 669952