Disposal; What If There Are Problems; Technical Data - Beurer HK 25 Mode D'emploi

7. Disposal

Please dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Elec-
tronic Equipment). If you have any queries, please contact the appropriate local authorities.

8. What if there are problems?

Problem
The temperature settings are not illuminated while
- the controller is properly connected to the heating pad
- the mains plug is connected to a working socket
- the sliding switch is set to 1, 2 or 3

9. technical data

See rating plate stamp on the heating pad.
cause
The safety system has
switched the heating
pad off permanently.
13
solution
Send the heating pad
and the controller for
servicing.