Disposal; What If There Are Problems; Technical Data; Guarantee / Service - Beurer HK 58 Mode D'emploi

CAUTION
Please allow the heat pad to cool down before storing. Otherwise the
•
heat pad may be damaged.
To avoid sharp folds in the heat pad, do not place any objects on top
•
of it while it is being stored.

7. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of
its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the
device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If
you have any questions, please contact the local authorities responsible for waste disposal.

8. What if there are problems?

Problem
The temperature settings are not illuminated while
­ the control is properly connected to the heat pad
­ the power plug is connected to a working socket
­ the side sliding switch on the control is set to setting
"I" (ON)

9. Technical data

See the rating label on the heat pad.

10. Guarantee / service

Further information on the guarantee and guarantee conditions can be found in the guarantee leaflet supplied.
Cause
The safety system has
switched the heat pad
off permanently.
16
Solution
Send the heat pad
and the control for
servicing.