Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GHG Professional 20-63 Notice Originale

If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is intended for bending and welding plastic,
stripping coats of paint and heating shrink tubing. It is also
suitable for soldering and tinning, melting adhesive bonding
and thawing water pipes.
The power tool is intended to be operated by hand, under
supervision.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Nozzle

Technical Data

Heat gun
Article number
Rated power input
Airflow
Temperature at the nozzle
B)
outlet
Temperature measurement
accuracy
– at the nozzle outlet
– on the display
Operating temperature of
C)
display
Max. permissible ambient
temperature during operation
Weight according to
EPTA-Procedure 01:2014
Protection class
A) Maximum possible input power
B) At an ambient temperature of approx. 20 °C
C) The display may go blank if outside the operating temperature.
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Bosch Power Tools
(2) Heat shield, removable
(3) Storage surface
(4) On/off switch and power settings
(5) Memory preset
(6) Temperature
(7) Thermal protection shutdown
(8) Fan symbol
(9) Airflow
(10) Fan button
(11) Memory button
(12) Plus/minus button
(13) Display
(14) Surface nozzle
(15) Glass protection nozzle
(16) Angle nozzle
(17) Reflector nozzle
(18) Welding wire
(19) Welding shoe
(20) Reducing nozzle
(21) Heat shrink plastic tube
A) Accessories shown or described are not included with the
GHG 20-63
3 601 BA6 2..
W 2000
l/min 150/150–300/ 100/100–250/
300–500
°C 50–630
±10 %
±5 %
°C 0 to +50
°C 40
kg 0.65
/Ⅱ
A)
A)
A)
A)
A)
A)
A)
A)
product as standard. You can find the complete selection of
accessories in our accessories range.
GHG 20-63 GHG 20-63
3 601 BA6 2D. 3 601 BA6 2C.
3 601 BA6 2G.
1600
100/100–250/
200–350 200–350
50–630 50–600
±10 %
±5 %
0 to +50 0 to +50
40
0.65
/Ⅱ
English | 7
GHG 23-66
3 601 BA6 3..
A)
1500 2100 (2300 )
150–300/
150–500
50–650
±10 % ±10 %
±5 % ±5 %
0 to +50
40 40
0.65 0.67
/Ⅱ /Ⅱ
1 609 92A 4RE | (26.10.2018)