Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch PHO 3100 Notice Originale

OBJ_BUCH-406-003.book Page 16 Tuesday, March 8, 2011 8:05 AM
16 | English
Products sold in GB only: Your product is fitted
with a BS 1363/A approved electric plug with in-
ternal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Product Description and
Specifications
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.

Intended Use

The machine is intended for planing of firmly
supported wooden materials, such as beams
and boards. It is also suitable for beveling edges
and rebating.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Planing depth scale
2 Depth adjustment knob (insulated gripping
surface)
3 Chip ejector (alternatively right/left)
4 Lock-off button for On/Off switch
5 On/Off switch
6 Chip ejection selector lever
7 Planer base plate
8 V-grooves
9 Handle (insulated gripping surface)
10 Blade drum
2 609 140 721 | (8.3.11)
11 Clamping element for blade
12 Fastening screw for planer blade
13 Carbide blade (TC)
14 Allen key
15 Extraction hose (Ø 35 mm)*
16 Chip/dust bag*
17 Parallel guide
18 Scale for rebating width
19 Locking nut for adjustment of rebating
width
20 Fastening bolt for parallel and beveling
guide
21 Angle stop*
22 Locking nut for angle adjustment*
23 Fastening bolt for rebating depth stop*
24 Rebating depth stop*
25 Park rest
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.

Technical Data

Planer
Article number
Rated power input
Output power
No-load speed
Planing depth
Rebating depth
Planing width, max.
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
PHO 3100
3 603 B71 ...
W 750
W 420
-1
min 16500
mm 0 – 3.1
mm 0 – 9
mm 82
kg 2.6
/II
Bosch Power Tools