Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher 110.110 Mode D'emploi

•
Do not place warm food products inside the cooling top, but leave them to cool
down first.
•
Do not overfill the cooling top, as this may have a negative impact on the
circulation of air inside the unit.
•
After a power failure or after removing the unit's plug, do not reconnect it to a power
source for at least 5 minutes.

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o Regularly clean the inside and outside of the cooling top with warm water, a moist
cloth and mild cleaning agent.
o Wash with clean water to remove any leftover cleaning agents. After cleaning, dry
and polish with a soft, dry cloth.
o Never use abrasive cleaning substances, such as scouring powder, alcohol-based
substances or solvents, as they may damage the unit's surface.
If the unit is to remain unused for a longer period of time:
o remove the plug from its socket;
o remove all food products from inside the cooling top;
o clean the cooling top as described above and leave it to dry.
- 30 -