Bartscher 110.110 Mode D'emploi page 26

•
Slide the right glass plate into the glass
housing.
•
Tightly screw in the screw for the glass
housing.
•
Fasten two nuts, angles for the
glass plate, sealing rings and
screws.
•
Slide the left glass plate into
the glass housing.
•
Tightly screw in the screw for
the glass housing.
•
Fasten two nuts, angles for the glass plate, sealing rings and screws.
•
Slide the rear glass plate into the rear glass housing.
•
Tightly screw in the screw for the glass housing.
1
2
3
6 7
8
5
9
- 25 -