Bosch GCM 10 GDJ Professional Notice Originale page 34

34 | English
Symbols and their meaning
For bevel angles, you need to adjust
2
1
the left/right fence extension or com-
pletely remove it.
2
1
Clamping handle open:
Bevel angles can be adjusted.
Clamping handle closed:
The set bevel angle of the glide arm is
locked.
Indicates the individual steps for ad-
justing the bevel angle.
1. Loosen the clamping handle
2. Swivel the glide arm slightly to the
left
3. Set the required bevel angle range
using the rotary knob
Setting the bevel angle ranges using
the rotary knob:
Saw blade inclination to the left (45° to
0°)
Saw blade inclination to the right (0° to
45°)
Entire swivel range of the glide arm (–
47° to +47°)
To set a mitre angle, the saw table
must be able to move freely and the
mitre detent override must be blocked:
– Pull lever ❶ and at the same time
push the mitre detent override
downward at the front ➋.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended as a stationary machine for mak-
ing straight cuts in wood with and against the grain. It is pos-
sible to cut mitre angles of -52° to +60° and bevel angles of
47° (to the left) to 47° (to the right).
1 609 92A 5U5 | (01.10.2020)
The power tool is designed with sufficient capacity for saw-
ing hardwood and softwood as well as chipboard and fibre-
board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Dust bag
(2) Glide mechanism clamping lever
(3) Handle
(4) Lock-off function for on/off switch
(5) Protective guard
(6) Retracting blade guard
(7) Adjustable fence
(8) Fence
(9) Insert plate
(10) Mitre detent override
(11) Locking knob for all mitre angles
(12) Mitre pre-setting lever
(13) Clamping handle for all bevel angles
(14) Detents for standard mitre angles
(15) Assembly holes
(16) Extension bar
(17) Recessed handles
(18) Extension bar clamping lever
(19) Screw clamp
(20) Guide roller
(21) Angle indicator for right-hand bevel angle range
(0° to 47°)
(22) Chip deflector
(23) Glide arm
(24) Depth stop adjusting screw
(25) Depth stop
(26) Transport safety lock
(27) Scale for bevel angles
(28) Angle indicator for left-hand bevel angle range
(47° to 0°)
(29) Adjustment knob for 22.5° bevel angle
(30) Hex key (6 mm/4 mm)
(31) Scale for mitre angles
(32) Rotary knob for adjusting the bevel angle range
(33) Saw table
(34) Saw blade
Dust extraction adapter
(35)
(36) Chip ejector
(37) Locking screw for the linkage of the retracting
blade guard
Bosch Power Tools